Buying Guide

Crafting Exquisite Fine Jewellery for over 70 Years

FAQS

Since its discovery seven thousand years ago, gold has been admired and valued for its warmth, its beauty, its sensuality, and spiritual richness.

From the first discoveries of gold in ancient times, its beauty and the ease with which it could be worked, inspired craftsmen to create unique objects of desire.

It has no oxides and is the only metal not affected by the oxygen in the atmosphere. No other metal surpasses gold in malleability and ductility.

Gold does not rust, tarnish or corrode. Pure gold is 24 carat which means it possesses 100% pure gold.

Chief producing countries of gold are South Africa, Russia, Canada, The United States and Australia.

Our gold is mostly sourced from Australia & New Zealand.

9ct means 9 out of 24 parts of the piece are pure gold while the other 15 parts are a mixture of copper, silver and zinc. 18ct means 18 out of 24 parts of the piece are pure gold.

CaratGold ContentFineness
24ct100.0%999
22ct91.6%916
18ct75.%750
14ct58.3%583
10ct41.6%416
9ct37.5%375
Gold can be mixed or alloyed with one or more metals to give it certain colours:
Colour Element
Yellow gold Gold, copper, silver, zinc
White gold Gold, palladium, zinc, copper
Red gold Gold, copper, silver

Yes, but for general use, 24ct is considered too soft.

On the Mohs Scale, gold is 2.5 – 3.

The Mohs scale of hardness was developed in 1812 by Fredrick Mohs and measures the hardness of minerals on a scale of 1-10.

Metal Chemical Symbol Mohs Hardness Melting Point
Gold Au 2.5 – 3 1945.4 °F
Platinum Pt 4 – 4.5 3224.3 °F
Palladium Pd 4 – 4.5 2831.0 °F
Silver Ag 2.5 – 3 1760.9 °F

Skin discolouration by gold is caused by skin secretions or perspiration containing chloride. When perspiration comes into contact with the copper and silver alloys in gold it sulphides producing dark-coloured salts, copper sulphate or silver chloride. 18ct gold is not affected as easily as the lower carat gold’s. Changing to white gold or platinum will usually eliminate the problem.

Detergent or other chemicals, which lodge between the ring and the skin, can cause allergies. Hairdressers are often affected. Rinsing well can help but it is probably best to remove rings before using any troublesome chemicals and to use a barrier cream.

Seamless wedding rings are turned from a single solid piece of gold, sterling or platinum. This makes for greater strength and improved durability.

High polish – bright and shiny.

Satin finish – light parallel lines that sharply reduce the metal’s reflections.

Brushed – a satin like finish produced by a metal brush.

Hammered – a design created by hammering directly onto the surface of the ring.

Hand engraved – the design is cut with a sharp edged tool.

Diamond cut – a facetted, bright look is achieved by making angled cuts into the surface of the ring with a facetted diamond tipped tool.

The entire inner surface of the wedding band is contoured to allow less of the ring to touch the skin. The ring will slide easily onto the finger to provide a secure and extremely comfortable fit.

The wear and tear on your ring is going to be a result of your unique lifestyle activities. We suggest that if you are going to do activities that could damage rings, no matter the carat, quality or metal, take them off and store them conscientiously.

In 3rd century Greece the ring finger was the index finger. In India it was the thumb. The western tradition began with the Greeks who believed that the third finger of the left hand was connected directly to the heart.

The wedding ring originated in ancient Egypt initially made of hemp or vine. The Romans later adopted the custom and cast the dye for today’s tradition. Iron was used by these forebears to symbolise the strength of the couple’s bond. In the fifteenth century the British elevated the symbol by replacing iron with gold.

The circular shape represents eternity and consistent love and this is accentuated by the fact that W&D wedding bands are seamless.

The wedding ring is placed on the finger before the engagement ring.

Yes, but there will be a slight colour difference.

This will depend on the pattern and the wear and tear due to lifestyle activities. Some rings can be re-engraved depending on the style and the age of the ring.

Rhodium is also a precious metal and is part of the platinum group. It also has catalytic properties.

As white gold can be grey in colour, it is common practice to rhodium plate white gold jewellery by an electrochemical process. It provides a bright, white, highly reflective and tarnish resistant coating, which is very hard and greatly increases the life of the high polish on the gold.

Most gold jewellery is alloyed with copper, zinc and silver. Salt in skin acids and other chemicals picked up in daily life create an oxidising or tarnishing effect, usually the less pure the gold the more noticeable the tarnish or dullness.

Trade Login

Product Enquiry